精品高速线材生产线

精品高线生产线关键技术和高速区核心工艺和设备由美国摩根公司设计和提供，全线自动化和传动系统由ABB公司负责设计和集成，使产品在质量、性能和成本等方面都具有很强的市场竞争能力。产品规格：光圆盘条ø5~25mm，螺纹盘条ø6~16mm；盘卷标准重量：最大2500kg；最大终轧保证速度为≥112m/s ；直径公差±0.1mm，不圆度±0.14mm 。生产的线材内部组织均匀，横断面上晶粒度差小于1级，通条性能均匀，氧化铁皮少。该生产线采用国际上先进适用的生产技术和装备，采用了热装热送工艺及目前世界上最先进的精轧机“8+4”型式等，可实现热机轧制工艺技术、全线的数字化控制和在线测径技术、全线的控轧控冷技术、在线探伤技术。能生产免退火的8.8级高强度冷镦钢盘条，也能生产免退火或缩短一半退火时间的10.9级以上的高强度冷镦钢，是一条具有国内一流、国际领先水平的高速线材生产线。

 AMERICAN MORGAN COMPANY DESlGNED AND PROVIDED FlNE WIRE LINE KEY TECHNOLOGY AND HlGH-SPEED KEY PART AND EQUlPMENT. AUTOMATlON AND DRlVE SYSTEM DESlGNED AND lNTEGRATED BY ABB COMPANY MAKES THE QUALlTY, PERFORMANCE AND COST HAVE A STRONG COMPETlTIVE EDGE IN THE MARKETPLACE. PRODUCE SPEClFICATlONS ARE ø5.0_~ø25MM. WEIGHT OF STEEL COlL lS 2500KG. FlNISHED ROLLlNG SPEED IS FASTER THAN 112M/S. MAXlMUM ROLLlNG SPEED IS 120M/S. DlMENSlON PRECISlON IS±0.1MM. ROUNDNESS TOLERANCE lS±0.14MM. THE WIRE RODS PRODUCED BY THlS ROLLlNG MlLL HAVE THOSE ADVANTAGES AS UNlFORM lNTERNAL ORGANlZATlON, GOOD PROPERTY, LESS SURFACE SCALE. GRAlN SIZE TOLERANCE IN CROSS SECTlON lS LESS THAN 1 LEVEL. THE PRODUCTlON LlNE ADOPT ADVANCED lNTERNATlONAL PRODUCTlON TECHNOLOGY AND EQUlPMENT SUCH AS HOT DELIVERY AND HOT CHARGlNG PROCESS OF THE CASTING BILLET, THE MOST ADVANCED TECHNlQUE 8+4 ROLLlNG PROCESS lN THE WORLD, HEAT ROLLlNG, DlGlTAL CONTROL, ONLINE DIAMETER MEASURlNG, WHOLE LINE CONTROLLED ROLLlNG, CONTROLLED COOLlNG AND lN-LlNE FLAW DETECTOR. lT CAN PRODUCE HlGH STRENGTH COLD HEADlNG STEEL WlRE ROD SUCH AS 8.8 GRADE EXEMPTlON ANNEALlNG, AND ABOVE 10.9 GRADE AVOlD ANNEALED OR SHORTEN THE TIME HALF OF ANNEALlNG. lT lS A FlRST-CLASS lNTERNATlONAL LEADlNG LEVEL HIGH-SPEED WIRE MlLL PRODUCTlON LlNE.

精品高速线材生产线 THE BOUTIQUE HIGH-SPEED WIRE ROD PRODUCTION LINE

美国摩根精轧机组 AMERICAN MORGAN FINISHED ROLLING MILL

美国摩根减定径机组 AMERICAN MORGAN REDUClNG SlZlNG ROLLlNG MlLL

吐丝机 SPlNNlNG MACHlNE

成品收集区 COLLECTING AREA